Fits Pentek EPM-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 10 Microns
$29.99
Fits Pentek EPM-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 10 Microns
Filter Life (Gallons): 50,000 and up
Filter Life (Months): 6 months
Flow Rate GPM: 2.5 - 5.0
Fits Brands: Fits most 20X4.5 housings
Compatibles: PENTEK-RFC20-BB Pentek EPM-20BB
Product Description
The Whole House Filter Replacement Cartridge provides a large surface area, which increases filtration effectiveness. This greater surface area in turn allows a high flow rate. This filter will last you up to 6 months, or every 100,000 gallons which equates to 4 gallons per minute, whichever comes first. This typically evens out to only 2-3 filter changes per year. The compatible filter for the Pentek EPM-20BB does an exceptional job of taking out chlorine taste an odor, or your money back!
Listing and template services provided by inkFrog
Fits Pentek EPM-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 10 Microns
Condition: NEW
Filter Life (Gallons): 50,000 and up
Filter Life (Months): 6 months
Flow Rate GPM: 2.5 - 5.0
Fits Brands: Fits most 20X4.5 housings
Compatibles: PENTEK-RFC20-BB Pentek EPM-20BB
Product Description
The Whole House Filter Replacement Cartridge provides a large surface area, which increases filtration effectiveness. This greater surface area in turn allows a high flow rate. This filter will last you up to 6 months, or every 100,000 gallons which equates to 4 gallons per minute, whichever comes first. This typically evens out to only 2-3 filter changes per year. The compatible filter for the Pentek EPM-20BB does an exceptional job of taking out chlorine taste an odor, or your money back!
- Big Blue sized filter cartridge, provides greater surface area
- High flow rate
- Filter life of 100,000 gallons
- Reduces contaminats such as chlorine, taste and odor
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 10 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 4 psi at a flow rate of 4 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
-
Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
Listing and template services provided by inkFrog