CFS Pleated Water Filter Cartridges for W34-PR, WVC34, R30, 4 Pack

• PLEATED, NOT SPUN - A pleated cartridge folds the media into a fan so it presents far more surface area than a smooth wall of the same size. Dirt spreads across the whole face instead of loading one spot, which is why a pleated filter can run a fine grade without the pressure drop you would expect. It can also be rinsed once or twice before it is spent, which no spun cartridge will do.
• CLEARER WATER FROM EVERY SOURCE - Whether your home runs on municipal tap water or a private well, the cartridge captures the sand, silt, dirt and rust that cloud water and wear out fixtures and appliances. Sediment media works on particles only - for taste and odor add a carbon stage, and for certified contaminant reduction look for cartridges tested to NSF/ANSI standards for those claims.
• FITS THESE PART NUMBERS - Direct replacement at 5 micron for W34-PR, WC34-PR and WVC34, and the R30 pleated position. It measures 9.75 by 2.625 in, which is slightly fatter than a standard 2.5 in cartridge but still seats in most 10 in slim line housings. Coarser pleated cartridges such as R50 at 50 micron fit the same housing but pass much larger particles.
• FEATURES: Our water filter cartridge particularly offers a larger surface area and a longer life. This cartridge eliminates chlorine, bad taste, and odor, and is available in a variety of sizes. This replacement cartridge will provide you with high filtering performance at a lower cost.
• MATCH THE FILTER TO YOUR WATER - Cartridges are maintenance parts, not water treatment plans, and no single one handles everything. Carbon reduces chlorine taste and odor. Sediment media captures sand, silt, dirt and rust. For any specific contaminant you are concerned about, look for a system certified to the NSF/ANSI standard that names it. If you are on a private well, start with a water test.

CFS PLEATED SEDIMENT CARTRIDGE - 5 MICRON, 4 PACK

A direct replacement for W34-PR, WC34-PR and WVC34, and the R30 pleated position, in the standard 10 in slim line size.

PLEATED, NOT SPUN
A pleated cartridge folds the media into a fan, so it presents far more surface area than a smooth wall of the same size. Dirt spreads across the whole face instead of loading one spot, which is why a pleated filter can run a fine grade without the pressure drop you would expect from one.

Pleated media has one advantage no spun cartridge has: it can be rinsed. Pull it, hose it off from the inside out, let it dry and put it back. That will not restore it forever, but it will get you one or two extra cycles out of each cartridge, which on a four pack is real money.

WHAT IT REPLACES
W34-PR, WC34-PR, WVC34 and the R30 pleated position. It measures 9.75 by 2.625 in, slightly fatter than a standard 2.5 in cartridge but still seating in most 10 in slim line housings. R50 is the same cartridge at 50 micron, so it fits the same housing but passes much larger particles.

WHEN TO CHANGE IT
Every three to six months on typical water, sooner on a well or after work on the line. The sign is pressure dropping at the taps. Rinse it once when flow first drops, and replace it when rinsing stops helping.

Compatible replacement cartridge. Part numbers are for reference only.