Standard AS568 O-ring
AS568-363 O-Ring, 6.475 x 0.210 in (164.47 x 5.33 mm)
The AS568-363 O-ring (dash 363, also written 2-363) has an inside diameter of 6.475 in (164.47 mm), a cross section of 0.210 in (5.33 mm), nominal 3/16 inch, and an outside diameter of 6.895 in (175.13 mm). We supply it in Buna-N (nitrile), Viton (FKM), EPDM or Silicone, in packs of 10, 25 and 100.
Size
| AS568 size | -363 |
|---|---|
| Inside diameter (ID) | 6.475 in (164.47 mm) |
| Cross section (CS) | 0.210 in (5.33 mm), nominal 3/16 in |
| Outside diameter (OD) | 6.895 in (175.13 mm) |
Rubber and pack prices
| Rubber | 10-pack | 25-pack | 100-pack |
|---|---|---|---|
| Buna-N (nitrile) 70AGood for water, air and petroleum oils; the usual choice for filter housings. | $9.99 | $23.99 | Request a quote |
| Viton (FKM) 75AGood for heat, fuels and many chemicals. | $47.99 | Request a quote | Request a quote |
| EPDM 70AGood for hot water, steam and chlorinated or chloraminated water. | $13.99 | $32.99 | Request a quote |
| Silicone 70A (orange)Good for a wide temperature range and food-contact use. | $18.99 | $51.99 | Request a quote |
A size match is not a fit claim for your equipment. Some sizes ship from stock; others have a 2-3 business day lead time before they ship. Not for oxygen, medical, aviation, scuba or other safety-critical use.
Part numbers that use this size
These O-ring part numbers are listed as AS568-363: