Hydronix 10" Sediment Water Filter Cartridge 4-Pack 1 Micron SDC-25-1001
- 10" Sediment Water Filter Cartridge - 1 Micron SDC-25-1001
The Hydronix compatible SDC-25-1001 filter cartridge fits the following water filter housings:
- Standard 10-inch housings
The 10" Sediment Filter Cartridge - 1 Micron is the same cartridge as the Liquatec SDF-25-1001 Sediment Filter. This polypropylene water filter, also known as , is used as pre-filtration for reverse osmosis systems and post-filtration for GAC filters. This Hydronix water filter reduces extra fine dirt, sand, silt, rust and sediment found in your drinking water. The SDC-25-1001 is also used in a wide range of applications such as residential, commercial, industrial and food service. In addition to replacing the Liquatec SDF-25-1001, this filter also replaces the Pentek 155225-43 as well as the Watts FPMB1-978.
This 10 inch water filter is an economical replacement filter for the Watts 10" FPMB1-978 Sediment Water Filter - 1 Micron. Sediment Filters are designed with true multi-stage depth filtration. This 1 micron water filter is constructed with a graded density that traps particles for superior performance and dirt holding capacity over standard spun polypropylene and string wound cartridges.
Filter Specifications:
- Replaces Part Number: SDF-25-1001
- Nominal micron rating: 1
- Flow rate: 0.6 psi @ 5gpm
- Dimensions: 2 1/2 inches x 9 7/8 inches
- Multi-stage depth filtration
- NSF/ANSI component tested- Replace cartridge every 6 months
- Temperature range: 40 to 145 degrees °F
These Filters can be used in standard size 10" water filter housings that use a standard 10 inch sediment cartridge: Pentek, Ametek, US Filter, American Plumber, Culligan and many other brands. Be sure to check the size of your filter cartridge before purchasing. For optimum performance of your filter housing, replace your Sediment Filter every 6 months depending on usage. Do not use this filter cartridge with water that is microbiologically unsafe or of unknown quality without sufficient disinfection before or after the system.
The Hydronix compatible SDC-25-1001 filter cartridge fits the following water filter housings:
- Standard 10-inch housings
The 10" Sediment Filter Cartridge - 1 Micron is the same cartridge as the Liquatec SDF-25-1001 Sediment Filter. This polypropylene water filter, also known as , is used as pre-filtration for reverse osmosis systems and post-filtration for GAC filters. This Hydronix water filter reduces extra fine dirt, sand, silt, rust and sediment found in your drinking water. The SDC-25-1001 is also used in a wide range of applications such as residential, commercial, industrial and food service. In addition to replacing the Liquatec SDF-25-1001, this filter also replaces the Pentek 155225-43 as well as the Watts FPMB1-978.
This 10 inch water filter is an economical replacement filter for the Watts 10" FPMB1-978 Sediment Water Filter - 1 Micron. Sediment Filters are designed with true multi-stage depth filtration. This 1 micron water filter is constructed with a graded density that traps particles for superior performance and dirt holding capacity over standard spun polypropylene and string wound cartridges.
Filter Specifications:
- Replaces Part Number: SDF-25-1001
- Nominal micron rating: 1
- Flow rate: 0.6 psi @ 5gpm
- Dimensions: 2 1/2 inches x 9 7/8 inches
- Multi-stage depth filtration
- NSF/ANSI component tested- Replace cartridge every 6 months
- Temperature range: 40 to 145 degrees °F
These Filters can be used in standard size 10" water filter housings that use a standard 10 inch sediment cartridge: Pentek, Ametek, US Filter, American Plumber, Culligan and many other brands. Be sure to check the size of your filter cartridge before purchasing. For optimum performance of your filter housing, replace your Sediment Filter every 6 months depending on usage. Do not use this filter cartridge with water that is microbiologically unsafe or of unknown quality without sufficient disinfection before or after the system.
